Glass tile background wall is a new decoration method of TV background wall in recent years. Generally, it is matched with tiles and colored glass. It looks very decorative. This kind of tile is not the kind of floor tile, but a kind of imitation stone tile with many styles.
The glass tile background wall decorated with this kind of material makes the grade of the entire room seem to be improved a lot, and it is also very easy to match the furniture in the living room. And because the tiles can have different styles, they can be stitched into different patterns in the end, adding new highlights to the living room.
However, although the decorative effect of the glass tile background wall is very good, due to the special nature of the material, special attention must be paid during construction, otherwise not only the desired effect will not be achieved, but it will become self-defeating. So, what should be paid attention to during construction?
Bevel Glass Tile
1. Rectangle glass tile cannot be placed on the ground directly when picking and placing. It is best to use paper skin, foam board, carpet, etc. as a cushion to allow it to buffer, so as not to scratch the pattern.
2. In order to form the whole picture, the general background wall tiles will be numbered on the back. Please carefully confirm before paving to avoid rework and affect the paving effect.
3. The bevel glass tile for laying the background wall cannot be pasted with ordinary cement, but a special building material adhesive must be selected and constructed in accordance with the instructions.
4. The construction sequence of the glass tile background wall should be from bottom to top, so as to prevent the pasted tiles from falling because they are not supported.
5. General items will follow the physical principle of thermal expansion and contraction, so when laying tiles, a gap of 1㎜-2㎜ can be reserved to avoid accidents in the future.
6. If it is necessary to make holes in the tile products, it is recommended to use glass drills. Other metal drills can easily damage the tiles. In addition, when fixing the tiles with screws, do not tighten them too tightly, otherwise the tiles will crack.
7. Some tiles are large in size for overall aesthetics. In this case, if unevenness is found when laying on the wall, you can support it with a support to avoid protrusions, and then remove it after drying.
8. The protective film on the tile must be peeled off after all the construction on the background wall is completed and dry. If there is a stain on it, you can wipe it with clean rag and water.
9. As long as the above points are achieved, the beauty of the glass tile background wall can be perfectly presented. It's not easy to be beautiful, and to see and cherish.
