Method of sticking glass Mosaic
How to paste glass Mosaic?The Custom Color glass mosaic supplier China would like to share with us.
(1) grassroots treatment. Clean up the loose concrete, mortar and other sundries on the wall, repair the feet, hands and eyes, water and wet the wall. Layer with cement mortar bottom leveling, mortar should beat solid and scraping ruler according to the surface of the impact bar scraping, and then rough with wooden trowel. The Angle of Yin and Yang must be vertical, square and level. In case of dry weather, water should be sprayed to maintain the base.
(2) play the grid line. If the design of glass Mosaic has horizontal and vertical split seams, it can be generally calculated according to the size of each pair of 308 mm x 308 mm, the gap between two mm, the typesetting modulus of 310 mm. The size of the back of each small Mosaic is about 18 mm x 18 mm, the gap between the grains is 2 mm, the number of tiles per grain can be 20 mm. For the wall between Windows, if the mantissa after its size row is complete cannot be divided by 20mm, then the last row of Mosaic cannot be arranged, and can only be adjusted through the division of the grid seam.
(3) wipe the bonding layer. Wet the wall leveling layer with water and brush it with plain cement slurry.
(4) play powder thread. Stretch the powder over the bond layer. Every pane is advisable with 4 couplet Mosaic commonly.
(5) scraper closed seam. The Mosaic paste surface is tiled on the board, with iron trowel will cement mud scraped into the Mosaic gap, after the gap is filled, scrape a layer of 1 ~ 2 mm thick cement cement layer on the surface. If white or light colored mosaics are used, white cement is used for bonding layer and caulking cement slurry.
That's all for the sharing,and we supply Custom Color glass mosaic for sale, if you have any demand for our products,just feel free to contact us.
