How Does Glass Mosaic Stick
Professional binder and caulking material from Glass Tile Manufacturer are recommended, and neutral binder is recommended for some products. (please pay attention to the package instructions)
2. After the base surface of the pasting is buried, smooth the 2-3mm thick paste binder with a professional knife.
3. With a toothed trowel on the smooth paste binder Joe out of the wavy stripes.
4. Lay and paste the Glass Mosaic Tiling , and note that the seam between the joint is the same as the width of the product.
5. Gently press the Mosaic surface to level it up and evenly eat the pulp.
6. About 20 hours, Mosaic fully coagulated binder, with a sponge trowel to fill the gap filling material. (soft tools to avoid scratching the surface of the product)
7. For about half an hour, when the filling material is half dry and wet, dip the high-density sponge into the 1-2mm concave joint with water to better highlight the refraction effect of the product.
8. Finally, clean the construction with dry towel.
